It all starts at the power plant.
The power of wind, sun or water is turned into electricity at the power plant. But this energy is not yet ready to reach your home.
The light in your home starts its journey at a power plant, kilometres away. We build the last and most critical part of that route, the part that enters your building.
It all starts at the power plant.
The power of wind, sun or water is turned into electricity at the power plant. But this energy is not yet ready to reach your home.
It gains strength for the long journey.
Transformers at the plant output raise the voltage of the electricity. Just as water pressure carries it over long distances, the energy can cross hundreds of kilometres with little loss.
From city to city, on giant pylons.
High voltage lines connect power plants across the country to the cities. The national grid operates this energy highway and brings the energy to the edge of the city.
This is where YA-KA's work begins.
The high voltage reaching the city is stepped down at transformer substations to a level that can be distributed to neighbourhoods. We design, build and safely commission these substations.
YA-KA scope of workFrom underground, to your building's door.
Energy reaches your street through underground cables; the transformer kiosk next to the building steps the voltage down to a level your building can use. From excavation and cable pulling to the kiosk and its connection, we are on site.
YA-KA scope of workThe right amount to every flat, safely.
The main distribution board shares the energy to the floors, and from the floors to the flats; in a fault it cuts only the affected section and protects the rest. We prepare the design of these boards and carry out their installation and connections.
YA-KA scope of workAnd the light comes on.
Pressing the switch is the last step of this long journey. That it looks so easy is proof that the work behind it was done right.
YA-KA scope of workEnergy reaches the switch from the grid through a chain of six links. The part of this chain that falls to your building, from the transformer substation to the switch, is our work.

Founded YA-KA Mühendislik in 1999 and now runs it as general manager.
YA-KA Mühendislik is an energy projects, contracting and consulting firm founded in İstanbul in 1999. Across Turkey and abroad, we design, install and maintain the electrical infrastructure of commercial, industrial and public buildings.
From hospitals to universities, from historic buildings to factories, we have successfully completed over 500 projects. Alongside electrical work, we carry out heating systems, air conditioning and construction contracting under the same roof.
YA-KA Mühendislik was founded in İstanbul.
Türkiye Yüksek İhtisas Hastanesi: 924 fire detection elements and CCTV with 101 cameras.
All electrical installation and lighting in the restoration of the Dolmabahçe Camii.
Turnkey electrical works for the management and control offices of the 3rd Bridge construction site.
GATA: renewal of distribution boards and power cables, distribution board rooms and SCADA system.
Earthquake strengthening project at the Linde Gaz Gebze 1 ASU facility, tank electrical works and relocation works.
İstanbul Silah new building: 1,600 kVA transformer installation in a concrete kiosk and busbar distribution.
Energy projects, contracting and consulting services continue under the management of Kemal Öztel.
We start every job on site: we measure, we listen, then we design.
We measure and record existing distribution boards, cables and loads on site.
We clarify your needs, plan and schedule with you.
Based on the measurements and your needs, we prepare an energy project that can be implemented on site.
Site survey · review of measurements, needs and plan

Our working principle. Site survey, design, installation, testing and maintenance: one team carries out every stage of the work. Information does not change hands, responsibility is not divided. From the start of the project to the end, you have the same point of contact.



Four separate companies and four separate contracts for design, installation, testing and maintenance. Information is lost and responsibility blurs at every handover.
One contract and one point of contact from design to maintenance. When you have a question, you know who to call.
01We inspect the site, measure the existing infrastructure and define the need together with you. The site survey is free of charge.
02Load and short-circuit calculations, single-line diagram and power installation projects in line with the standards.
03We select and procure distribution boards, cables and other equipment according to the project, and plan delivery to site according to the work programme.
04Installation of cables, busbars and distribution boards; a tidy, labelled and documented installation.
05After measurements and protection tests, we complete the official acceptance procedures and hand over the power safely.
06Periodic maintenance, measurement and reporting. Technical support continues as long as the system is in operation.
From medium voltage transformer substations to lighting, from fire detection to uninterruptible power systems, we design, install, commission and maintain all electrically powered systems of the facility.
We design, install and commission the systems that step the medium voltage from the grid down to a level your facility can use.
We install and commission the main distribution, floor and compensation boards as one system. The compensation working with the board balances reactive power and avoids reactive power charges on the bill.
From the inside of a building to its façade, from the car park to the square, we install lighting systems that deliver the right light to the right place efficiently.
When the power is cut, critical areas such as operating theatres and server rooms are not left in the dark even for a moment; the generator steps in and carries the entire facility.
The moment smoke is detected the alarm sounds, floor guidance shows the nearest exit and card-access doors open automatically.
We channel the power of lightning from outside the facility to the ground; people and equipment inside stay safe. We report the measurements with EMO (Chamber of Electrical Engineers, Turkey) approval.










The distribution across cities of the 128 references we selected from over 500 projects. Start by tapping a city on the map; you can see all of them year by year in the list below.
Tap a city on the map or in the list; the featured projects in that city open here. Map positions are approximate.
You can filter the list by sector or search by institution, city or type of work.
Service:
No reference matches this search. Try another word.
We have worked in six building types. Tap a sector to filter the chronological reference list by that sector.
Facilities that allow no error, such as GATA, Boğaziçi Üniversitesi, Galatasaray Lisesi and Dolmabahçe Camii.
Authorisation certificates for electrical, construction and natural gas installation work.
The team that prepares the project also carries out the installation on site; there is no gap between design and execution.
924 fire detection elements in a single hospital, data infrastructure for 1,300 users in a 13-storey building, 6.7 km of overhead line.
We carry out the periodic inspection of LV earthing installations with calibrated instruments and report according to TS HD 60364 principles.
Fill in the form or call; our technical team will get back to you within 24 hours.
If you allow, we use Google Analytics cookies to understand how you use the site.